커피 컬럼 정보

커피 애호가를 위한 "물에 대한 이해" - WATER FOR COFFEE LOVERS by Pentair

2014-04-17  


WATER FOR COFFEE LOVERS


We know that water is one of the most important ingredients in a cup of coffee. In this booklet we will cover water treatment for the perfect espresso, water profiling for coffee professionals and how to create the perfect cup of coffee. Our aim is to give you a clear understanding of water; the issues you need to address, and the options you can consider to ensure the best coffee experience for your customer.


fff.jpg


 

MAKING WATER WORK FOR YOU

Brewed coffee is over 98% water, the remainder being compounds that are extracted from the coffee grounds. The quality of water used for brewing coffee can have a dramatic effect on the taste of the finished product and the performance of your coffee equipment. We want to identify and highlight the important objective and subjective issues that revolve around taste and equipment protection, enabling you to make informed decisions about your water treatment options. We’ll start with an objective summary of water and how it affects brewing equipment.

 

FACT: Hard water will form scale inside coffee equipment, reducing equipment efficiency, causing costly failures and in a commercial enterprise ultimately loss of revenue.

 

But it’s not just Hard water that can cause equipment damage. Water is considered to be the “universal solvent”. The purer the water, the more capable it is of damaging equipment by promoting corrosion. This is also true for water with a natural or artificially low pH. Additionally, many water sources contain mineral salts that can be corrosive as well as scale forming.

 

 

WATER; WHAT IS IT AND HOW DOES IT RELATE TO COFFEE AND COFFEE EQUIPMENT?

It is well documented that pure water is a chemical substance with formula H2O: one molecule of water has two hydrogen atoms covalently bonded to a single oxygen atom, and in its purest state has a pH of 7 or neutral. Water is very rarely found in its pure state; so what’s in your tap water will impact the coffee you brew and your coffee equipment. Some of the relevant information has already been widely debated within the barista community, other issues have not previously received as much attention. We will cover the key topics and their influence on coffee. We can also draw on existing knowledge from the wider beverage and brewing industry where water chemistry has long been understood.

 

TOTAL DISSOLVED SOLIDS

• Total Dissolved Solids (often abbreviated TDS) is basically anything in the water that isn’t Hydrogen (H) or Oxygen (O). These can be dissolved or suspended (colloidal) particles. In general TDS are not considered to be associated with health issues, high TDS water would normally indicate a high water hardness.

• Minerals dissolved in water can be split into two categories, positively charged ions (Cations) and negatively charged ions (Anions).

• The SCAA recommends that TDS levels are between 75 ppm and 250 ppm so as not to adversely affect coffee extraction and taste.

 

TDS. THE CATIONS

Calcium & Magnesium

Often called the hardness minerals. Calcium and less so Magnesium are generally the most abundant of the cation minerals in water. Calcium can form insoluble salts which create the “scale” issues affecting equipment performance.

 

Whilst it is accepted that a good cup of coffee needs some of these hardness minerals, there is evidence to suggest that calcium is preferable to magnesium, further backed up by references from the beer industry that magnesium salts can add an unwanted astringent bitterness.

  

Sodium & Potassium

Sodium is usually more abundant in water than potassium. At low levels they can add a welcoming sweetness to the beverage, whilst at high levels sodium salts can taste… salty. Sodium salts are usually highly soluble so unlike calcium won’t cause scale issues, but it is believed that Sodium Chloride can swell coffee grounds effecting extraction times and rates. Due to its links with potential health issues, the amount of Sodium allowed in drinking water is limited to 200 mg/litre. The SCAA recommendations are for sodium content ideally to be around 10 mg/litre.

 

Iron & Copper

Even in relatively small amounts metals such as Iron and Copper add a metallic taste to a beverage. Both can be present in the water supply but increased copper levels can occur due to corrosion in building pipework and / or brewing equipment.

  

TDS. THE ANIONS

Carbonates, Bicarbonates and Hydroxides

Also known as the alkalinity ions. Carbonates form salts with insoluble hardness metals, causing scaling of equipment. As alkalines they also have a great effect on the pH of the water. The SCAA recommends a desired alkalinity level around 40 mg/litre as CalciumCarbonate (CaCO3).

 

Chlorides

Sodium chlorides can give a salty taste to coffee. Chlorides are also the nemesis of Stainless Steel, and at high levels can break down the protective coating causing pitting corrosion. The effects of corrosion on stainless steel are subject to many variables, so it is always best to check with your equipment manufacturer for their recommended Chloride limits. Some manufacturers suggest a threshold of 30 mg/litres others quote limits as high as 100 mg/litres.

  

Sulphates

Calcium Sulphate in water will cause a hard white scale. Fortunately Calcium Sulphate is slightly more soluble than Calcium Carbonate and Sulphate levels are usually far lower than those of Carbonates, so Sulphate scale is not generally a problem.

 

pH

pH is the measure of acidity or alkalinity. If there are more H’s than OH’s than Carbonates the water will be acidic and vice versa the water will be alkaline.

That’s not the end of the story. Water likes to dissolve gases such as Carbon Dioxide (C02) which would create mild Carbonic Acid. High levels of dissolved Carbon Dioxide will make the water more acidic. pH 7 is neutral, SCAA recommendations are that levels of between pH 6.5 and pH 7.5 are best for Coffee.

 

HARDNESS

The definition of Total Hardness is the sum of the Calcium and Magnesium ions in the water. In reality most water hardness is predominately Calcium hardness.

Certain salts of these metals are insoluble and the main cause of limescale. Hardness also affects the rate of extraction of brewed coffee. To achieve a balanced brew the SCAA recommend a hardness of between 17 mg/litre and 85 mg/litre when measured as CaCO3.

 

TOTAL HARDNESS IS MADE UP OF TWO COMPONENTS:

Permanent Hardness is the amount of hardness minerals that can’t be removed through the boiling of water.

Temporary Hardness also known as Carbonate Hardness, is the measure of hardness minerals that can be removed by boiling. This will be predominately Calcium Carbonate.

 

DISINFECTANTS

With the noticeable exception of Denmark, the municipal water sources in most countries are treated with disinfectant to prevent contamination from bacteria and viruses which otherwise could be harmful to health.

Chlorine is the most commonly used disinfectant but in the USA, UK, Sweden and Finland there is a growing practice to use Chloramine, a compound of chlorine and ammonia.

Chlorine and chloramine not only impair the coffee taste by oxidizing essential oils, but can also be corrosive to metal parts and damaging to “O” rings and seals.

For good coffee chlorine and chloramine should be removed from the water along with any other off tastes and odours.

 

DIRT PARTICLES

Even though you might not be able to see them, water contains lots of small dirt particles. These particles can act like sandpaper and be damaging to equipment valves and seals. The particles can also accumulate to block the small valve openings in modern brewing equipment.

 

WATER TREATMENT TECHNOLOGIES

Now you understand what’s in your water, we have to look at the common technologies used to treat it. These technologies may be used individually or combined within a single system or unit.

 

Sediment Filter

In its most basic form a sediment filter is a screen to filter out dirt particles. At the other end of the spectrum it can be a membrane filter capable of removing viruses and bacteria from the water.

 

Choosing a filter with a micron rating ≤ 5.0 microns should ensure that your water is free from damaging dirt particles.

 

NOTE: Some filters employ a blending bypass. Don’t treat the bypass water for sediment removal.

 

Carbon Adsorption

Carbon filters are extremely efficient at removing chlorine, off tastes and odours from the water supply. Carbon can be incorporated into a filter in a granular form or in a more solid form such as a carbon block also incorporating sediment reduction capabilities.

 

NOTE: Some filters employ a blending bypass. Don’t treat the bypass water for chlorine reduction.

 

Whilst carbon is efficient at removing chlorine many carbon filters are not efficient at removing chloramines. Should you be in an area where chloramine is a problem it may require investing in a filter containing specialized carbon filtration that

will remove chloramines.

 

SOFTENING TECHNOLOGIES

STRONGLY ACIDIC CATION RESINS

 

Salt Softeners

The vessels of these water treatment units contain small plastic beads (resin) charged with sodium ions. In all water conditions the resin will exchange their sodium ions for calcium and magnesium ions in the water, effectively removing hardness from the water. As sodium ions are heavier than calcium or magnesium the TDS will increase slightly, whilst pH and Alkalinity will effectively remain constant.

 

Advantages to the barista are that their equipment will no longer be at risk of scaling. The disadvantages are increased sodium and TDS levels which may impact coffee quality. These softening systems can often be regenerated at end of life either manually or automatically.

 

 

URBAN MYTH: The use of Sodium softening is illegal for drinking water. Not technically true although in most countries it is recommended that Sodium softening is not used for drinking water.

The elevated Sodium levels may mean that the water is no longer “potable” according to local water regulations.

 

WEAK ACIDIC CATION RESINS

De Carbonisation

The vessels of these water treatment units contain small plastic beads (resin) charged with hydrogen ions. The resin will exchange their hydrogen ions

for calcium and magnesium ions associated with the carbonates. Calcium levels are now reduced so the water hardness and TDS will also reduce. With the carbonates effectively removed and the water now laden with hydrogen the pH will drop dramatically, typically as low as pH 4.5. To help counteract this low pH most systems of this kind incorporate a blending bypass to limit the softening effect of the resin. When properly set the pH on a new system is likely to be in the region of pH 5.5 - 6.0. Bypasses can be either fixed or operator adjustable. They can be a simple hole allowing the water to pass through and can be sensitive to variations in water pressure or flow rates.

Alternatively they can be highly engineered designs which provide a consistent performance for all water conditions.

 

NOTE: Where a filter incorporates a bypass, check the level of filtration offered to the bypassed water

 

SCALE CONTROL

SCALE INHIBITORS

Phosphates

Scale inhibitors are often phosphate salts dosed into the water. There are many forms of phosphate each having their own particular characteristics.

 

URBAN MYTH: There is speculation regarding the safety of consuming phosphates.

Phosphate in black coffee: 50 mg/litre

Phosphate in a Cappuccino: 250 mg/litre

Phosphate in a typical Cola beverage: 700 mg/litre

 

 

When Phosphates are used in water treatment, they interfere with the formation of some chemical compounds such as Calcium Carbonate that are insoluble in water. They do not soften the water, merely inhibit or slow down the formation of these

scale forming compounds. Phosphates can also be utilized in helping to prevent equipment corrosion.

 

MINERAL REDUCTION

Reverse Osmosis

A reverse osmosis system is based around a semi permeable membrane which only allows the smallest molecules (Hydrogen and Oxygen ions) to pass through. The remaining ions are washed away to drain.

When specifying a Reverse Osmosis system a number of factors should be considered.

Some RO systems have a relatively low water production rate. To ensure sufficient water is available for peak demands an external storage tank is often recommended. If the water pressure supplying the membrane is low, the system may need a water boost pump.

Traditional RO systems can waste a lot of water, increasing utility costs. High Efficiency systems are now available offering high water recovery rates.

 

REVERSE OSMOSIS SYSTEM ARE TYPICALLY AVAILABLE IN THREE DIFFERENT STYLES


• REVERSE OSMOSIS: WATER ONLY

These systems often produce a water that is devoid of the minerals you require to make a good coffee. The water is also likely to be aggressive to coffee equipment.


• REVERSE OSMOSIS: WITH BLENDING

These systems allow blending of a proportion of filtered tap water to achieve the desired TDS levels. The complexity of the blending system used will dictate the stability of the treated water.


• REVERSE OSMOSIS: WITH CALCIUM DOSING

The treated RO water is passed through a bed of calcium which then dissolves back into the water to achieve a balanced, re mineralized water quality. A number of coffee equipment manufacturers are starting to show a preference for this type of system for use in areas of high chlorides, to prevent any bypass blending of the chlorides back into the water.

 

SUMMARY

Now you know what’s in water and how it can impact coffee taste and coffee brewing equipment. You also have an insight into the common treatment methods currently available and how they will affect your water. So what should you do next…

 

• Obtain an analysis of what’s in your local water. This can be obtained freely from your municipalities water supplier, and will probably be an average of their readings for your water source over the last 12 months. If the supply source changes so can the water quality. Self-test the main contaminants with easy to use and relatively cheap test equipment. This will also allow you to keep an eye on your water quality and allow for seasonal fluctuations. Invest in a full water analysis from your tap. This will highlight any issues for your individual premises.

• Decide on what you want your brew water to look like. TDS levels ? Hardness ?

• Select your preferred Filtration and water treatment partner. Your supplier should offer the full spectrum of technologies.

• Work with you Filtration supplier to specify a system that meets the needs of your business and falls within your budget for capital expenditure and operational costs. Ensure you choose a system that doesn’t just meet your needs now, but has the capacity or can be easily expanded to meet increased demand as your business grows.


에버퓨어로 익히 잘 알려진 미국 Pentair 사의 "커피를 위한 물"에 대한 초점으로 알기 쉽게 씌여진 글입니다. 기본적으로 우리가 흔히 접하는 물속의 구성요소가 어떻게 존재하고 있는지 커피에 있어서는 어떠한 특성을 나타내는지에 대한 기본적인 이해에 가장 적합한 내용으로 씌여져 있습니다. 


단순히 스케일 생성과 TDS 수치로 대변되어 왔던 커피에서의 물의 개념에 보다 "워터 레시피"의 개념을 적용하는 등의 새로운 접근들이 대두되고 있는 시점에 한번쯤 읽어봄직한 글이 아닌가 싶습니다. 


SCAA 나 기타 커피 관련 협회에서 크게 기준으로 삼는 물에 대한 파라미터들이 있습니다. 이 수치들은 단순히 센서리 측면의 최상의 컵을 만들기 위한 접근뿐만이 아니라, 세계 각국의 로스터, 그리고 바리스타, 소비자들이 순수하게 "커피만으로 충분한 소통"을 가능케 하는 일종의 "프로토콜(Protocol)"이라는 생각을 해봅니다.


어느 정수기가 가장 좋은가?의 개념은 가장 일반적으로 요구되는 질문이기도 한 동시에 가장 비현실적인 질문이기도 합니다. 특히 향미의 기반이 되는 커피에서의 물에 있어서는 더더욱 그렇지 않을까 싶습니다. 가장 먼저 할 일은 본인의 물의 상태를 정확히 아는 것이 아닐까 합니다.  


profile

ABOUT ME

대한민국 No.1 커피 미디어 "블랙워터이슈" 입니다.
일반회원

댓글 1

profile

M_coffee

2020-11-01 18:30  #1382492

좋은 글 감사합니다 :)

[컵앤소서] 덴비 임페리얼 블루 티컵 10

덴비의 밀리언 셀러 아이템 임페리얼 블루 티컵입니다. 영국의 대중적인 키친웨어로 사랑받는 브랜드이지요. 대개 커피를 좋아하시는 분들은 실용적인 아이템을 좋아하시지만 여성 감성으로 조금 다가가면 한 잔의 커...

작성자: 에스프레소프릭

등록일: 2014-04-30

엘로치오의 에스프레소 추출을 위한 샷 미러 스탠드 3

[프리뷰] 엘로치오의 에스프레소 추출을 위한 샷 미러 스탠드 가정용 에스프레소 머신 제조사로 잘 알려진 엘로치오의 샷 미러 스탠드입니다. 바텀리스 포터필터를 사용하여 샷을 추출할 때 높이 차이로 인한 커피 튐...

작성자: 서리

등록일: 2014-04-29

Chapter #7. MILK STEAMING - 밀크 스티밍 6

우유는 에스프레소와 뗄 수 없는 가장 좋은 궁합을 가진 재료이기도 합니다. 그 자체로도 커피와 꽤나 잘 어울려 많이 이용되기도 하지만, 뜨거운 증기를 만나 고운 거품의 형태가 되면 에스프레소의 향미와 어우러져...

작성자: BlackWaterIssue(Admin)

등록일: 2014-04-19

원터치 로스팅이 가능한 스마트한 홈로스터 / Presso Smart...

원터치 로스팅이 가능한 스마트한 홈로스터 / Presso Smart Roaster(Mason-800) 국내 가정용 에스프레소 머신 관련 장비 유통 및 커피 용품으로 잘 알려진 코디아(Presso.co.kr)에서 간편한 편의성을 무기로 새로운 ...

작성자: BlackWaterIssue(Admin)

등록일: 2014-04-18

커피 애호가를 위한 "물에 대한 이해" - WATER FOR COFFEE ... 1

WATER FOR COFFEE LOVERS We know that water is one of the most important ingredients in a cup of coffee. In this booklet we will cover water treatment for the perfect espresso, water profiling for coffe...

작성자: BlackWaterIssue(Admin)

등록일: 2014-04-17

고수율의 커피가 항상 저수율의 커피보다 우월한가? 3

비밀글입니다.

작성자: BlackWaterIssue(Admin)

등록일: 2014-04-02

TDS미터기를 이용한 총용존고형물(TDS)의 측정

TDS미터기를 이용한 총용존고형물(TDS)의 측정 “항상 원하는 것을 얻을 수는 없지.”라는 가사를 쓸 때 Mick Jagger가 TDS 미터기를 염두해 두고 쓰지는 않았을 것입니다. 하지만 TDS 미터기 사용자들은 이를 참고할만...

작성자: BlackWaterIssue(Admin)

등록일: 2014-03-27

Chapter #6. SHOT EXTRACTION - 에스프레소 추출 23

에스프레소 추출은 다양한 커피 제조 방법 중에서도 단연 가장 까다로운 커피 추출 방법으로 손꼽힙니다. 주어진 30여초 가량의 시간을 통해 복잡하고도 다양한 변수를 정교히 통제해야하니, 짧고도 매력적인 하나의 ...

작성자: BlackWaterIssue(Admin)

등록일: 2014-02-28

스캇 라오(Scott Rao)와의 인터뷰 from coffee compass

작년 말 새로운 신간을 eBook 형태로 출간한 스캇 라오의 인터뷰입니다. 최근 추세가 되고 있는 Matt Perger 를 필두로 한 Coffee Shot에 대한 스캇 라오의 견해가 흥미롭습니다. 또 다른 새로운 저서를 집필 중이라...

작성자: BlackWaterIssue(Admin)

등록일: 2014-02-22

Chapter #5. BASIC FOR ESPRESSO - 에스프레소 추출을 위한... 9

에스프레소 추출은 일반적인 음료를 만드는 과정과는 사뭇 다른 양상을 가지고 있습니다. 과학적이고도 섬세한 접근이 요구되면서도 굉장히 짧은 시간에 그것도 아주 소량의 음료를 만드는 독특하고도 매력적인 과정...

작성자: BlackWaterIssue(Admin)

등록일: 2014-02-15

So why Blue Bottle Coffee? 왜 블루바틀인가?

Outside-In vs. Inside-Out 기업 외부 환경을 반영한 기업 내부 발전 방안 모색 How most roasters sell coffee to consumers is broken and outright wrong. This is rooted in an old industry problem we’ve long ...

작성자: BlackWaterIssue(Admin)

등록일: 2014-02-02

Chapter #4. GRINDING - 가정용 커피 그라인더 3

단적으로 보다 나은 홈 에스프레소를 위해 먼저 고려해야 할 것은 에스프레소 머신보다 에스프레소용 그라인더의 선택이라 할 수 있습니다. 에스프레소 머신이 추출에 관여하는 부분 이상으로 그라인더의 성능이 에스...

작성자: BlackWaterIssue(Admin)

등록일: 2014-01-29

Chapter #3. Home Espresso Machine - 가정용 반자동 머신... 8

Home Espresso Machine - 가정용 반자동 머신의 종류와 특성 커피 문화의 발전과 더불어 가정용 에스프레소 머신 역시 그에 대한 관심만큼이나 다양한 종류와 각각의 특징들로 소비자의 요구를 충족시켜주고 있습니다...

작성자: BlackWaterIssue(Admin)

등록일: 2014-01-12

에스프레소 입문자과 매니아를 위한 가정용 중급, 상급(하... 11

가정용 에스프레소 머신 시장이 확장되면서 국내에도 많은 에스프레소 머신들이 런칭이 되고 있고, 또 해외에서도 보다 전문적인 다양한 머신들이 새롭게 선보이고 있습니다. 세계적으로 에스프레소 커피에 대한 관심...

작성자: 운영자

등록일: 2014-01-12

Chapter #2. History of Espresso machine - 에스프레소 머... 6

History of Espresso machine - 에스프레소 머신의 역사 에스프레소를 에스프레소 머신과 떼어놓고 설명하는 것은 사실상 불가능합니다. 에스프레소 머신의 가열, 가압 능력이 있어야 비로소 한잔의 에스프레소를 만...

작성자: BlackWaterIssue(Admin)

등록일: 2014-01-09